WEG 07518XT3E365T Hazardous Location Motor Division I, Class I/Class II, Rigid Base, 75 hp Horsepower, T-Stat VSLEW-012-PH-A 5 A Operating Temperature -

5 A Operating Temperature - Minimum 50 Degrees F NEMA Enclosure Rating 12 Cooling Capacity - Maximum 6

Application Cutting Bar Stock

300 RPM Ring Material Grade 100Cr6 Matched Bearing Type Duplex Lubricant Material MT47 Grease Dynamic Radial Load Capacity 108

Application: General Use

WEG 07518XT3E365T Hazardous Location Motor Division I, Class I/Class II, Rigid Base, 75 hp Horsepower, T-Stat VSLEW-012-PH-A 5 A Operating Temperature -Hazardous Location Motor, Three Phase, Motor Design Three Phase, 75 hp HP, Nameplate RPM 1,780 RPM, No. of Speeds 1, Voltage 230 460V AC, Full Load Amps 166. 0 83. 2 A, 365T Frame, Usable @ 208V Usable at 208V, Usable @ 200V Not Usable at 200V, Hz 60 Hz, Max. Ambient Temp. 40 Degrees C, Motor Service Factor 1. 15, Motor Thermal Protection T Stat, Ins. Class F, Hazardous Location Class Class I, Class II, Temp. Code T3C, Motor Enclosure Design Totally