2 1/2" Steel Hose Mender Female Size_4 1/2 Inch Global type "D" aluminum 1/2

Global type "D" aluminum 1/2 inch female camlock (Cam & Groove) coupler to 1/2 inch female NPT threads

Type "B" stainless steel 3 inch female camlock (Cam & Groove) coupler to 3 inch male NPT threads

A hose pack that allows one person to carry up to 150 ft

This is the standard configuration for protecting FDC inlets on the exterior of buildings where firefighters would connect a hose during an emergency

2 1/2" Steel Hose Mender Female Size_4 1/2 Inch Global type "D" aluminum 1/2The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or