CMT-190.508.11B - UP & DOWNCUT SPIRAL BIT W/BRNG 1/2'' little rojects A V-shaped groove is routed

A V-shaped groove is routed on the reverse side of the ALUCOBOND plus composite panel using a “V" groove router bit

Use in up to 3" pipes with removable drum that accepts up to 3/8" x 35' cableProtect surfaces from rotating drum with the fixed outer shroudIlluminate dark work areas with the pivoting LED and 3 brightness modesQuickly lock/release cable with the sliding nose coneVariable speed trigger with drill-style inline forward/reverse button

It provides up to 19% more power than the DCS388 60V MAX Reciprocating Saw with 1874 unit watts out

and the 37432 - 32" ideal for headers

CMT-190.508.11B - UP & DOWNCUT SPIRAL BIT W/BRNG 1/2'' little rojects A V-shaped groove is routedThe new CMT solid carbide spiral flush trim bit is manufactured with a special supermicrograin formulation that has increased hardness with a higher transverse rupture point. Combined with the low helix cutting angle, this bit with double bearing allow the cabinet maker to sheer wood and wood products cleanly, providing more efficient chip ejection than standard flush trim bits. In production settings these new bits will run cooler and the edges will