Ironworker's Side-Cutting Square Nose Pliers, 9.19 in OAL, High-Leverage, Heavy-Duty Knurled ORS NASCO and cotter shackles have thread

and cotter shackles have thread protected ends and are 100% proof tested|Standard industry tolerances apply

Metal Arbor Diam [Nom] 5/8 in Arbor Thread - TPI or Pitch 5/8 in to 11 Big Catalog YES Brand PFERD Bristle Diam 0

general purpose epoxy bonds virtually any material|Fills or seals cracks and rebuilds worn surfaces|Comes in a 1 oz syringe with a built-in plunger for easy dispensing without equipment|Working time is approximately 4 minutes|

close tolerance

Ironworker's Side-Cutting Square Nose Pliers, 9.19 in OAL, High-Leverage, Heavy-Duty Knurled ORS NASCO and cotter shackles have threadTwists and cuts soft annealed rebar tie wire High leverage design, rivet is closer to the cutting edge for 46% greater cutting and griping power than other pliers designs (213 9ST, D213 9ST, D2000 9ST) Square nose design Spring loaded action for self opening Hook bend handle, left hand option available (D201 7CSTLFT)