Kukko 70-021-S - Pulling jaw set ball bearing ISO 6007, 6008, 6009, 6010, 6011, 6012, 6013, 6206, 6210, 6211, 6306, 6307 Makita Tolerance 3 % Tightening torque

Tolerance 3 % Tightening torque minimum 40 Nm Head Width b 30 mm Tightening torque maximum 200 Nm Head Thickness a 23 mm Scale Graduation (Nm) 1 Nm Standard DIN EN ISO 6789-2:2017

and detectable by a receiver up to 1200ft (400m) diameter

(1) Impact Shelf 4"x32"

2cm (1 1/4 inches)

Kukko 70-021-S - Pulling jaw set ball bearing ISO 6007, 6008, 6009, 6010, 6011, 6012, 6013, 6206, 6210, 6211, 6306, 6307 Makita Tolerance 3 % Tightening torqueNOTE* This item ships in 510 business days The pulling jaw sets of the 70 0 S series are suitable for ball bearing pullers of the 70 0 series and are used for non destructive removal of deep groove ball bearings without disassembling the shaft. In addition to the jaws, the sets also include stop rings as spare parts.