headstock bearings and seals honda tlm50 tlm 50 1985 Honda C50 This set of rear shocks

This set of rear shocks is designed to replace the original factory shocks on a Suzuki GSX400 for the years and models shown above

It is a high quality coil so you'll no longer need to run a resistor in the system if you get a pair of these fitted

This set of blue series brake pads will fit the front brake on a Yamaha YZF600 for the years and models shown above

This set of taper roller bearings have been manufactured to replace the original steering or ball bearings on a UH125 K2 to L3 models

headstock bearings and seals honda tlm50 tlm 50 1985 Honda C50 This set of rear shocksBrand new set of headstock steering bearings and seals to fit: Honda TLM 50 (1985). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda TLM50 for the years and models shown above. Top sized: 22. 5mm x 41mm x 12mm. Bottom sized: 24mm x 41mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require different sizes