Headstock Bearings and Seals: Honda CL250 CL 250 (1981-1984) Triumph Speed Triple 1050 This rectifier is designed to

This rectifier is designed to replace the original unit on a Honda NSS250 Forza for the years 2001

100mm from centre to centre with 2 HT leads and 2 spade connectors

Yamaha FJR 1300 A (2003-2005)

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Kawasaki GPX750R / ZX750F for the years and models shown above

Headstock Bearings and Seals: Honda CL250 CL 250 (1981-1984) Triumph Speed Triple 1050 This rectifier is designed toBrand new set of headstock steering bearings with seals to fit: Honda CL 250 SC (1981 1984). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda CL250 for the years and models shown above. Top and bottom steering bearings with seals are included. Top sized: 26mm x 48. 5mm x 15mm. Bottom sized: 30mm x 50mm x 15mm. All sizes set out ID x OD x Thickness. Seals