Anemometer Wind Speed Sensor w/Analog Voltage Output POL_6V High-Power (HP) 25D mm Gearmotors and 42×19mm wheels

and 42×19mm wheels

TI-RSLK Chassis Board uses the patented latching circuit from the Pololu pushbutton power switch

you'll call it creative freedom

its pins connect to sensor array pins as follows:

Anemometer Wind Speed Sensor w/Analog Voltage Output POL_6V High-Power (HP) 25D mm Gearmotors and 42×19mm wheelsAn anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit outside and measure wind speed with ease. To use, connect the black wire to power and signal ground, the brown wire to 7 24VDC (we used 9V with success) and measure the analog voltage on the blue wire. The voltage will range from 0. 4V (0 m s wind) up to 2. 0V (for 32. 4m s wind speed). That's it! The sensor