L3GD20H 3-Axis Gyro Carrier with Voltage Regulator Shipping:1 day If the H Bridge needs

If the H Bridge needs to be used with current values ​​>2

and all kinds of liquid in an airtight container under high pressure

putting the motor driver channel into a low-current sleep mode and disabling the motor outputs (setting them to high impedance)

It is also easy to change the shield over to SPI where you can use any 4 digital pins by shorting two solder jumpers on the top of the PCB

L3GD20H 3-Axis Gyro Carrier with Voltage Regulator Shipping:1 day If the H Bridge needsThis sensor is a carrier breakout board for the ST L3GD20H three axis gyroscope, which measures the angular rates of rotation about the roll (X), pitch (Y), and yaw (Z) axes. Angular velocity measurements with a configurable range of 245 s, 500 s, or 2000 s can be read through a digital IC or SPI interface. The board has a 3. 3 V linear regulator and integrated level shifters that allow it to work over an input voltage range of 2. 5 V to 5. 5 V, and