SKU: 55655049515
Ships within 48 hours · Estimated delivery Sep 11 - Sep 16
You can power the SparkFun RedStick over the USB plug or through the power input (which supports a JST connector for a single celled Lipo)
GET STARTED WITH THE SPARKFUN QWIIC MICRO GUIDE
There is also an FTDI header on board and we\'ve provided a hardware profile for the Arduino IDE to make it even easier to program
The actual current through each coil changes with each microstep
SparkFun Motor Driver - Dual TB6612FNG (1A) SF_Arduino You can power the SparkFunThe TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1. 2A (3. 2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of
US$ 26.50
US$ 16.50
US$ 39.90
US$ 46.50
US$ 19.90
US$ 18.60
US$ 16.50
US$ 22.50
US$ 20.50
