headstock bearings and seals yamaha yz100 yz 100 1976 1981 Kawasaki GT550 This set of brake pads

This set of brake pads will fit the front and rear brake on a Kawasaki ER 6N for the years and models shown above

This ignition coil has been manufactured to replace the original coil pack on a Honda XR125 for the years and models shown above

This set of head stock bearings are cup and cone style and have been manufactured to replace the original set of steering bearings on a MBX80 for the years and models shown above

they're number plate mounting points

headstock bearings and seals yamaha yz100 yz 100 1976 1981 Kawasaki GT550 This set of brake padsBrand new set of headstock steering bearings and seals to fit: Yamaha YZ 100 (1976 1981). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Yamaha YZ100 for the years and models shown above. Top sized: 25mm x 43mm x 12mm. Bottom sized: 30mm x 48mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. The seal thickness is